Product Overview

The Crestron HD-TXA-4KZ-101 is a DM Lite 4K60 4:4:4 transmitter that extends HDMI plus analog audio over a single CATx cable to a compatible receiver or DMPS Lite switcher. It supports 4K60 with full 4:4:4 color sampling, HDR formats, and HDCP 2.3, with an analog stereo input that can be embedded into the outgoing signal. The transmitter is built for point-to-point AV distribution where a separate audio source must accompany the HDMI feed. It is part of the Crestron DM Lite 4K60 4:4:4 endpoint family.

Product Description

The HD-TXA-4KZ-101 takes an HDMI input and converts it to the DM Lite format for transmission over a CAT5e or higher twisted pair cable. For 1080p, WUXGA, and 2K signals, distances up to 230 ft (70 m) are supported; UHD and 4K signals are supported up to 130 ft (40 m). Its balanced/unbalanced stereo analog audio input can be embedded with the HDMI video, and an audio selection push button switches between analog and HDMI audio when paired with a DM Lite 4K60 4:4:4 receiver or DMPS Lite HD-PS series switcher. Analog audio is digitized at 24-bit 48 kHz with a 20 Hz to 20 kHz frequency response. HDR10, HDR10+, and Dolby Vision metadata pass through along with CEC and EDID, and the HDMI input is DVI and Dual-Mode DisplayPort interface compatible with the appropriate adapter. When paired with a DMPS Lite switcher, the transmitter can be configured and controlled through the switcher web interface with control system and .AV Framework support. For the complete pairing, power, and form-factor details, refer to the Crestron data sheet.

Key Features

• HDMI over CATx Extends an HDMI source as DM Lite over a single CAT5e or higher cable.
• Analog audio embedding A balanced/unbalanced stereo input can be embedded with the HDMI video signal.
• Audio source selection A push button switches between HDMI and analog audio with supported endpoints.
• 4K60 4:4:4 support Resolutions up to 4K60 with full 4:4:4 color sampling at supported color depths.
• HDR and Dolby Vision HDR10, HDR10+, and Dolby Vision video formats are supported.
• Long-reach extension Up to 130 ft (40 m) for UHD/4K and up to 230 ft (70 m) for 1080p, WUXGA, and 2K.
• HDCP 2.3 and CEC/EDID Protected content support with CEC and EDID pass-through.
• DVI and DisplayPort compatible HDMI input works with DVI and Dual-Mode DisplayPort sources using the correct adapter.

Typical Applications

• Conference rooms HDMI extension with an embedded program-audio feed to a remote display.
• Classrooms and lecture halls Combining a presentation laptop with a separate microphone or audio source.
• Houses of worship Carrying HDMI plus a mixed analog audio feed to remote screens.
• Auditoriums Point-to-point AV paired with a DMPS Lite switcher for managed control.

Technical Specifications

Frequently Asked Questions

Which receivers work with the HD-TXA-4KZ-101?
It pairs with DM Lite 4K60 4:4:4 receivers such as the Crestron HD-RXC-4KZ-101, plus supported DMPS Lite switchers. Refer to the Crestron data sheet for the full list.

How does analog audio embedding work?
A balanced/unbalanced stereo source connects to the audio input and can be embedded with the HDMI video. A push button selects HDMI or analog audio when used with a supported receiver or DMPS Lite HD-PS switcher.

What cabling should I use?
Use Crestron DM-CBL-8G, DM-CBL-ULTRA, or third-party CAT5e or higher. Shielded cable is recommended above 1080p and required when bundling multiple runs.

Does the HDMI input accept DVI or DisplayPort sources?
Yes, with the appropriate adapter or interface cable for DVI or Dual-Mode DisplayPort sources.

What warranty applies and where can I get help?
The transmitter carries the Crestron 3-year limited warranty. For pairing guidance or project pricing, Contact Creation Networks.