Product Overview

The C2G CG29537 75ft DisplayPort Active Optical Cable (AOC) extends a DisplayPort signal 75 feet over fiber strand construction, delivering 4K 60Hz video with immunity to EMI and RFI in commercial AV environments. Designed for classrooms, conference rooms, healthcare facilities, and digital signage applications where copper DisplayPort cables fall short or interference is a concern, this AOC provides a clean, single-cable solution from DisplayPort source to DisplayPort display at distances beyond standard passive cable capability. Note: Limited availability confirm stock before specifying.

Product Description

Active optical cables use fiber strands between the connectors to carry the DisplayPort signal. The fiber construction is smaller in diameter and more flexible than copper, making it easier to route through tight spaces, conduit, and overhead cable management. The CG29537 supports DisplayPort resolutions up to 4K 60Hz, HBR2 (High Bit Rate 2) data rates, and is powered by the DisplayPort source port no external power supply required in standard installations.

The cable is directional the source end connects to the DisplayPort output and the display end connects to the DisplayPort input. It cannot be field-terminated or cut. For permanent AV installation in classrooms, surgical theaters, or data centers, the fiber construction provides stable, consistent display output regardless of nearby interference sources.

Key Features

• 75ft (22.9m) DisplayPort Extension Extends DisplayPort signals 75 feet with no signal boosters or active repeaters required.
• 4K 60Hz Support Delivers 4K resolution at 60Hz from DisplayPort source to display over the full cable length.
• Fiber Strand Construction EMI/RFI Immune Eliminates electromagnetic and radio frequency interference affecting copper cables in commercial environments.
• Flexible, Small-Diameter Cable Fiber construction is thinner and more flexible than copper, simplifying installation through conduit and tight cable paths.
• Source-Powered Powered by the DisplayPort source port in standard installations; no separate power supply required.
• Directional Cable Source and display ends are clearly labeled for correct installation.
• No Field Termination Factory-terminated connectors ensure consistent signal performance.

Typical Applications

• Classroom DisplayPort projector and display cable runs
• Conference room long-run DisplayPort to display connection
• Healthcare and surgical theater display installation in high-EMI environments
• Digital signage in commercial spaces with interference concerns
• Data center KVM and display extension

Technical Specifications

Frequently Asked Questions

Does this cable require a power supply?

No external power supply is required in most installations. The cable is powered by the DisplayPort source port.

Can the cable be cut to a shorter length?

No. Active optical cables are factory terminated and cannot be cut or field-terminated.

Is this cable compatible with USB-C to DisplayPort adapters?

It depends on the adapter. If the USB-C to DisplayPort adapter provides standard DisplayPort signal output and sufficient power, the AOC should function. Test compatibility before specifying in a permanent installation.

What is the warranty on the CG29537?

C2G provides a standard commercial warranty. Contact Creation Networks at for warranty and support.

What does limited availability mean for this product?

C2G has flagged this SKU as having limited remaining stock. Confirm current availability at before specifying in new installations.