Product Overview

The Williams AV BKT 031 is a heavy-duty wall and ceiling mounting bracket for infrared assistive listening hardware, rated to support up to 10 pounds. It mounts directly to a junction box ideal when running conduit and uses a ball-and-socket head with 360-degree swivel and 90-degree tilt on a 1/4-20 male stud with a 7-inch extension. For permanent commercial installations of IR emitters, the BKT 031 is the stronger alternative to lighter-duty mounting hardware.

Product Description

In new construction and code-driven commercial projects, low-voltage AV devices are often fed through conduit terminating at a junction box. The BKT 031 is built for exactly this scenario: its wall plate mounts directly over the junction box, and the bracket conceals connected cables for a finished, professional appearance with no exposed wiring. The engineered-plastic construction with fused epoxy finish carries a 10-pound load rating more than three times the capacity of the lighter BKT 024 so it handles larger IR emitters and combination devices with margin.

The ball-and-socket head swivels a full 360 degrees and tilts 90 degrees, while the 7-inch extension clears trim and ceiling lines to give the emitter unobstructed line-of-sight into the seating area. The bracket can also be inverse mounted for ceiling installations. Use it to hang devices such as the Williams AV IR E4 IR+ emitter via the standard 1/4-20 stud, and find matching transmitters and emitters in the Williams AV assistive listening collection.

Key Features

• Direct Junction-Box Mounting Attaches over a standard junction box for conduit-fed installations in commercial buildings.
• 10-Pound Load Capacity Supports heavier IR emitters and combination devices that exceed lighter bracket ratings.
• Ball-and-Socket Articulation Delivers 360-degree swivel and 90-degree tilt for precise infrared coverage aiming.
• 7-Inch Extension Stands the device off the wall or ceiling to clear trim and maintain line-of-sight to listeners.
• Concealed Cable Path Hides connected cables inside the mount for a clean, finished installation.
• Inverse Mount Capable Installs upright on walls or inverted on ceilings depending on room geometry.
• Standard 1/4-20 Stud Mates with Williams AV IR mounting hardware and common AV accessories.

Technical Specifications