Product Overview

The Hosa HMIC-100 is a 100 ft Hosa Pro Series XLR microphone cable for the longest runs in large venues, touring productions, and permanent installs. This balanced XLR mic cable uses a REAN XLR microphone cable connector set and 20 AWG OFC microphone cable conductors to carry clean balanced audio across long distances with strong noise immunity. The 100 ft XLR3F to XLR3M microphone cable is built for front-of-house-to-stage pulls, remote mic positions, and large arena, worship, and conference deployments.

Product Description

At 100 ft, the HMIC-100 is a dedicated long-run cable for spanning auditoriums, arenas, ballrooms, and houses of worship, reaching from a far stage or remote mic position back to a snake head or rack. It terminates in REAN XLR connectors by Neutrik AG with silver-plated contacts for low-resistance signal transfer at both ends. Over a 100 ft run, EMI/RFI rejection is the most important characteristic: the balanced topology combined with the 90% OFC braided shield and 20 AWG x 2 OFC conductors preserves the signal-to-noise ratio even when the cable parallels high-current power, dimmer, and network cabling for the full length. Zinc die-cast housings and chuck-type strain relief give the terminations the durability to withstand repeated long pulls, coiling, and teardown, making this a professional microphone cable for live sound, recording, and large AV installations. Compare adjacent lengths in the family: the HMIC-050 (50 ft) and the HMIC-030 (30 ft). Browse the full Hosa collection to standardize on one cable family across a large venue.

Key Features

• REAN XLR Connectors by Neutrik AG This Neutrik REAN mic cable terminates in XLR3F and XLR3M connectors for a secure balanced connection on the longest pulls.
• Silver-Plated Contacts Silver-plated contacts reduce contact resistance to keep balanced audio clean across the 100 ft length.
• 20 AWG OFC Conductors Two 20 AWG oxygen-free copper conductors deliver a strong, low-loss signal over the full 100 ft distance.
• 90% OFC Braided Shield The dense braided shield provides strong EMI/RFI rejection and protects the signal-to-noise ratio on extended parallel runs.
• Zinc Die-Cast Housing The zinc die-cast connector housing withstands repeated coiling, long cable pulls, and teardown in touring and install use.
• Chuck-Type Strain Relief Chuck-type strain relief clamps the jacket to resist pull-out under the stress of long routed runs.

Technical Specifications