Product Overview

The Poly Studio E70 VESA mounting kit (875K7AA) is the OEM bracket for attaching a Poly Studio E70 dual-lens smart camera to a room display using the display’s VESA hole pattern. It is the supported alternative to a shelf or credenza placement in large conference rooms, training rooms, and classrooms where the E70 needs to sit on the display centerline and stay there. The kit supports above-display and below-display orientations and ships with the fasteners and standoffs the installation requires. Because the E70 is a camera-only component of a modular system, mounting it correctly is what determines whether DirectorAI framing tracks the room or the back wall.

Product Description

The Studio E70 is used as the camera in modular room builds typically paired with a Poly G7500 codec or a Teams Rooms compute appliance so unlike an all-in-one video bar it arrives without an integrated display clamp. This VESA mounting kit closes that gap. It fixes the camera rigidly to the panel it is framing against, which keeps the dual-lens field of view square to the seating area and stops the small angular drift that makes auto-framing hunt in large rooms.

For an AV designer, the practical value is repeatability across a floor plate. Mounting to the VESA pattern rather than to furniture means every room in the standard gets the same camera height and the same optical relationship to the display, so a room profile written once behaves the same way in every space. Above-display mounting is the common choice for rooms with tiered or long tables where the camera needs to look down the length of the room; below-display mounting suits low ceilings, tall panels, and rooms where an existing wall plate or soundbar occupies the space above the screen.

The kit is passive hardware no power, no firmware, no configuration. It is specified one per camera. Order it alongside the Poly Studio E70 dual-lens smart camera so the mount arrives with the camera rather than after the install crew is already on site, and add a Poly TC10 touch controller or Poly TC8 if the room still needs in-room call control. For large rooms where the table extends past the codec’s integrated audio coverage, plan the microphone layout at the same time as the camera position.

Key Features

• OEM VESA Bracket Designed by HP Poly specifically for the Studio E70 smart camera, so fit and load path are supported rather than improvised.
• Above or Below Display Both mounting orientations are supported, letting the camera clear a soundbar, a low ceiling, or an existing wall plate.
• Fasteners and Standoffs Included The kit ships with the bracket, fasteners, and standoffs the installation requires, so no separate hardware run is needed.
• Consistent Camera Geometry Mounting to the display’s VESA pattern reproduces the same camera height and angle in every room built to the same standard.
• Stable Auto-Framing A rigid mount removes the angular drift that causes DirectorAI framing to hunt when the camera sits loose on a credenza.
• Passive Hardware No power, firmware, or configuration is involved, so the mount adds nothing to the room’s commissioning checklist.

Technical Specifications