Product Overview

The TASCAM MM-4D/IN-X is a compact half-1U Dante mic/line input converter with a built-in DSP mixer, converting 4 channels of analog mic or line input to Dante network audio at up to 96 kHz/24-bit. XLR connectors with +48V phantom power and remote-controllable gain via TASCAM DCP CONNECT make it a flexible analog-to-Dante on-ramp for commercial AV installations.

Product Description

Part of the TASCAM Dante Compact Processor Series, the MM-4D/IN-X converts 4-channel XLR mic/line analog input signals to 4-channel Dante output, with optional simultaneous 4-channel Dante input/output for internal DSP mixing within the Dante network. The built-in DSP matrix mixer supports small-scale installed audio systems without requiring a separate mixing device. Input gain is remotely controllable via TASCAM DCP CONNECT, Dante Controller, or third-party control systems. Phantom power (+48V) is supplied per input. Two units mount side-by-side in the optional AK-RS1 half-rack shelf. Optional PS-P1220E AC adapter adds redundant power. Available at Creation Networks alongside the ML-4D/OUT-X and AK-RS1.

Key Features

• 4-Channel Analog Mic/Line to Dante XLR inputs convert to 4-channel Dante output at up to 96kHz/24-bit.
• +48V Phantom Power per Input Supports condenser microphones on all four channels.
• Built-In DSP Matrix Mixer Internal mixing and routing without an external DSP device.
• Remote Gain Control Via TASCAM DCP CONNECT, Dante, or third-party controllers.
• Half-1U Form Factor Two units fit in one rack unit via optional AK-RS1 shelf.
• Optional PS-P1220E Redundant Power AC adapter for continuous-power installations.

Typical Applications

• Conference room and boardroom Dante mic input node
• House of worship Dante audio distribution input
• Commercial facility distributed audio mic-to-Dante on-ramp
• Classroom and auditorium AV Dante input expansion

Technical Specifications

Frequently Asked Questions

What is the difference between MM-4D/IN-X and MM-4D/IN-E?Both are identical in function and specifications. The MM-4D/IN-X uses XLR connectors; the MM-4D/IN-E uses Euroblock connectors for permanent installation wiring.Can the MM-4D/IN-X be controlled remotely?Yes. Input gain and DSP settings are controllable via TASCAM DCP CONNECT software over the Dante network, or via third-party control systems.Does the MM-4D/IN-X require an external switch for Dante?Yes. A Gigabit Ethernet switch (non-PoE) is required for Dante network connectivity. Refer to TASCAMs Dante infrastructure recommendations.